08
2020
-
09
Air cooler manufacturer: How to layout the hydraulic system air cooler to make its actual effect best
Classification:
【Summary】The air cooler manufacturer is a machine equipment that uses gas as a heat exchanger to carry out heat exchange, and heat is brought according to the gas. The key to the actual effect of heat removal lies in the total heat transfer area and exhaust air volume of its component heat pipe radiator. The same total heat transfer area, the greater the exhaust air volume, the better the actual effect of heat removal. Its installation parts and natural ventilation problems in the whole process of use must be fully considered, then how to layout explosion-proof air cooler can make it give full play to the best practical results?
The air cooler manufacturer is a machine equipment that uses gas as a heat exchanger to carry out heat exchange, and heat is brought according to the gas. The key to the actual effect of heat removal lies in the total heat transfer area and exhaust air volume of its component heat pipe radiator. The same total heat transfer area, the greater the exhaust air volume, the better the actual effect of heat removal. Its installation parts and natural ventilation problems in the whole process of use must be fully considered, then how to layout explosion-proof air cooler can make it give full play to the best practical results?
The first layout part is very focused on, the air cooler should be laid out at the lowest wind frequency of the equipment in the whole year, the upper side of the main gallery, the upper level of the structure or the tower. It must be noted that the air cooler manufacturer can not be arranged in the working temperature equivalent to or higher than the spontaneous combustion point of raw materials and transport, storage of liquefied hydrocarbons above the machine equipment; Otherwise, baffle protection and maintenance of non-igniting raw materials should be selected. The second is the provisions of the layout standard, cooling tower layout together, should be the same layout, should choose a column layout; Prevent one part from being laid out in a row and the other in a flat row; The middle distance between the two humidified air coolers or the wet zone cooperative air coolers in the layout should not be less than 3M.
When using the explosion-proof air cooler, the user should pay attention to the water pipe of the air cooler in the oil station, whether it is inside or on the surface, it should be neat and vertical, and it can not be bent or a part of the defect, and it can not be crushed and cross section reduced. Each cooling circulating water pipe must meet the standard before it can be used. In the case of installation of the explosion-proof air cooler, the cooling core should be inseparable from its side plate. The number of radiators can vary within the range of ± 1%. The deviation of the blade distance and flatness of the radiator should be less than 10% of the required blade distance. The curvature of the radiator along the cyclone orientation should be less than 15% of the required pitch.
More importantly, the cleaning work of the air refrigeration of the oil station must ensure that the standard is met, the refrigeration core must undergo strict anti-rust treatment to solve the work, its surface should be carried out paint process treatment, and the car paint should be maintained evenly, dry and no damage. Air cooler manufacturers can carry out packaging under clean and dry standards, and the sealing mouth should be checked if it is tight and there can be no leakage of steam.
WhatsApp:
Add：Wuhan Plant: C02 of HuaDing Industrial Park XingSan Road Hannan District WuHan 430000
E-mail：nelsonfzhyd@outlook.com
WhatsApp: +86 18162995411
Tel: +86 27 84737880
Online message
Copyright © Fu Zheng Hydraulic Machinery (Wuhan) Co., Ltd.
Powered by:300.cn | Support for Ipv6 access