PRODUCTS

PRODUCTS

valve

Products

News

SD180 series sectional valve

SD180 series sectional valve

SD180 series sectional multi-way valve is an open type multi-way valve, mainly used in mobile machine such as agricultural machine, construction machine, mining machine and so on. The modular design of the sectional multi-way valve can be matched with different modules according to needs, and overflow valves and re-fill valves can be added according to customer requirements. The control methods include manual, pneumatic, electro-hydraulic control and flexible shaft control to meet different customer requirements and demand

Key words:

GDV50 Sectional valve

GDV50 Sectional valve

DCV50 series sectional multi-way valve is an open multi-way valve, mainly in mobile machine such as agricultural machine, construction machine, mining machine and so on. The modular design of the sectional multi-way valve can be matched with different modules according to needs, and overflow valves and re-fill valves can be added according to customer requirements. The control methods include manual, pneumatic, electro-hydraulic control and flexible shaft control to meet different customer requirements and demand.

Key words:

PLPSL3 load sensing proportional valve

PLPSL3 load sensing proportional valve

PLPSL3 series load sensing multi-way proportional valve The maximum flow rate that single unit can provide is up to 120L/min A valve-compensated load-sensitive multi-way valve developed for construction machinery, construction machinery, port machinery, etc. Open center for dosing pump system Closed center for variable pump systems Priority function Rich pilot control methods, manual control, hydraulic control, electro-hydraulic proportional control, CAN bus control, etc. Load pressure compensation to achieve flow resistance against load fluctuations Fast response and small hysteresis

Key words:

P80 series monoblock valve

P80 series monoblock valve

P80 series monoblock valve The valve body is integral gray cast iron. Spring end cover, mechanical positioning end cover, made of die-cast aluminum. Parallel circuit, check valve with load at the oil inlet. Can provide manual, pneumatic control, electro-hydraulic control. Can provide carryover port(power beyond). Can provide spring center and detent positioning. Provide various spool functions: used to control double-acting cylinders, single-acting Spool with oil cylinder and oil motor. The valve has low operating force and good flow characteristics. The multi-way valve can be combined into an integral valve with 1 to 6 spools

Key words:

LKF-114 series flow control valve

LKF-114 series flow control valve

LKF series is full range pressure compensation variable flow control valve. After careful design, its throttle orifice area will change with the rotation of the valve stem. No matter how the pressure of the CF port EX port changes, the flow rate of the control port is always stable and constant. It has an adjustable spring safety valve so that the pressure can rise to the set safety pressure. The factory setting of the safety valve pressure is 1500psi, and the adjustable range is 750-3000psi.

Key words:

SV33 series diverter valve

SV33 series diverter valve

SV33 series diverter valve Size: G1/4'-G1' Pressure to 350bar Flow 40-200L/min Features: Ductile iron body, hardened spool, low leakage, suitable for three-position six-way arrangement, smaller size than the same size slide valve, easy to operate

Key words:

4WE4 solenoid directional valve

4WE4 solenoid directional valve

4WE4 series solenoid directional valve is a two-position or three-position direct-acting solenoid spool valve. It has the smallest overall size among similar products and is suitable for the control of small and compact hydraulic systems. Features: Wet solenoid valve design, low noise, long lifetime, high pressure resistance, fast switching. Five-cavity valve body design, the channel between the five valve chambers has high control accuracy, ensuring a relatively large flow rate at a low pressure drop

Key words: